کارت ماژول سیسکو مدل HWIC-4ESW

Cisco Card Module HWIC-4ESW
(دیدگاه کاربر 2)

ویژگی ها:

تعداد پورت: 4
نوع پورت: RJ45
پشتیبانی توسط: 2801/2811/2821/2851/2901/2911/2921/2951/3825/3845/3925/3945/1941/1841

محصولات مشابه:

ضمانت اصالت کالا
باشگاه مشتریان
ارسال سریع کالا
مشاوره رایگان
بازگشت کالا
گارانتی مسترشبکه

گارانتی اصالت و سلامت فیزیکی

استعلام قیمت و موجودی:

از طریق ایمیل

موجود

۱,۵۰۰,۰۰۰ تومان

موجود

کارت ماژول سیسکو مدل HWIC-4ESW

Cisco Card Module HWIC-4ESW
(دیدگاه کاربر 2)

ویژگی ها:

تعداد پورت: 4
نوع پورت: RJ45
پشتیبانی توسط: 2801/2811/2821/2851/2901/2911/2921/2951/3825/3845/3925/3945/1941/1841

محصولات مشابه:

ضمانت اصالت کالا
باشگاه مشتریان
ارسال سریع کالا
مشاوره رایگان
بازگشت کالا
گارانتی مسترشبکه

گارانتی اصالت و سلامت فیزیکی

راه های ارتباط با ما:

موجود

۱,۵۰۰,۰۰۰ تومان

موجود

مشخصات و اطلاعات Cisco Module HWIC-4ESW:

کارت ماژول سیسکو HWIC-4ESW ساخت شرکت سیسکو می‌باشد که در بازار تجهیزات شبکه به فروش می رسد. به کمک این ماژول می‌توانید چهار پورت اترنت لایه 2 را با قابلیت سویچینگ و تحت کنترل IOS Cisco به Router اضافه نمایید.

کارت ماژول سیسکو HWIC-4ESW با چهار پورت اترنت یکپارچه از طریق نرم افزار Cisco IOS Catalyst، سوئیچینگ لایه‌ی 2 را بر روی روتر به‌صورت یکپارچه انجام می‌دهد. این محصول دارای چهار پورت اترنت با سرعت 10\100 است که چهار پورت را به صورت Inline در داخل روتر (یک سوئیچ شبکه چهار پورت داخل روتر) در اختیار کاربران قرار می‌دهد.

 

استاندارهایی که کارت ماژول سیسکو HWIC-4ESW پشتیبانی می‌کند عبارتند از:

  • Port Autosensing
  • Quality Of service)QoS)
  • VLAN support from 802.1P standards
  • VLAN support from 802.1Q standards
  • and 802.1D spanning tree protocols are standard on the Cisco EtherSwitch HWIC

EtherSwitch HWIC از دستگاه‌های مانند اکسس پوینت سیسکو و یا آی پی فون سیسکو و یا هر دستگاهی که از استاندارد IEEE 802.3af را پشتیبانی کند، سازگار است. این ماژول بر روی روترهای سیسکو سری 2800/2900 و 3800/3900 و 1800 (ماژول) قابل استفاده است.

 


 

بیشتر بخوانید: ماژول های HWIC و کاربرد آن

 


 

مشخصات فنی کارت ماژول سیسکو HWIC-4ESW:

HWIC-4ESW Specification
Four port 10/100 Ethernet switch interface card Cisco Router High-Speed WAN Interface cardDescription
Data, voice, and videoTarget Applications
:Cisco 1800 (modular), Cisco 2800, and Cisco 3800 series integrated services routers
Cisco 1841 (supports HWIC-4ESW only; no PoE support)
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
Cisco 3825
Cisco 3845
Cisco 1941
Cisco 2901
Cisco 2911
Cisco 2921
Cisco 2951
Cisco 3925
Cisco 3945
Supported Router Platforms
HWIC-4ESW = Single-wide HWIC form factorForm Factor
HWIC-4ESW = 3.08 x 4.74 x 0.76 in.(Dimensions (W x D x H
HWIC-4ESW = 79 grams (0.17 lb)Weight
Standards
Ethernet: IEEE 802.3, 10BASE-T
Fast Ethernet: IEEE 802.3u, 100BASE-TX
IEEE 802.1d Spanning Tree Protocol
IEEE 802.1p CoS for Traffic Prioritization
IEEE 802.1q VLAN
IEEE 802.1x Security
IEEE 802.3x Full Duplex
IEEE 802.3af Power over Ethernet Standard
IEEE Protocols
RFC 2284, PPP Extensible Authentication Protocol (EAP)RFC
RFC 1213
IF MIB
RFC 2037 ENTITY MIB
CISCO-CDP-MIB
CISCO-IMAGE-MIB
CISCO-FLASH-MIB
OLD-CISCO-CHASSIS-MIB
CISCO-VTP-MIB
CISCO-HSRP-MIB
OLD-CISCO-TS-MIB
CISCO-ENTITY-ASSET-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
BRIDGE MIB (RFC 1493)
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-VLAN-IFINDEX-RELATIONSHIP-MIB
RMON1-MIB
PIM-MIB
CISCO-STP-EXTENSIONS-MIB
OSPF MIB (RFC 1253)
IPMROUTE-MIB
CISCO-MEMORY-POOL-MIB
ETHER-LIKE-MIB (RFC 1643)
CISCO-ENTITY-FRU-CONTROL-MIB.my
CISCO-RTTMON-MIB
CISCO-PROCESS-MIB
CISCO-COPS-CLIENT-MIB
MIBs
SNMP and Telnet interface support delivers comprehensive in-band management, and a CLI management
console provides detailed out-of-band management.
An embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis.
A Switched Port Analyzer (SPAN) port can mirror traffic from one or many ports to another port for
monitoring all nine RMON groups with an RMON probe or network analyzer.
Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location
Network Timing Protocol (NTP) provides an accurate and consistent time stamp to all switches within
.theintranet
.Two LEDs per port provide convenient visual indication of the port link and inline power status
.Crash information support helps enable a switch to generate a crash file for improved troubleshooting
.Show-interface capabilities provide information about the configuration capabilities of any interface
The Response Time Monitoring (RTTMON) MIB allows users to monitor network performance between the HWIC switch and a remote device
Manageability
10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP)
cabling
100BASE-TX ports: RJ-45 connectors; two-pair Category 5 UTP cabling
Connectors and Cabling
Link status LED: One LED per port for indicating link status
Inline power LED: One LED per port system for inline power status indication
Indicators
Power Requirements
Optional PoE system power supply available for all Cisco 2800 and Cisco 3800 series routersInternal Power Supply
Optional for the Cisco 2800 series and Cisco 2900 Series routersExternal Redundant Power Supply (RPS2300)
For the Cisco 3845, 3925 and 3945 router onlyInternal Redundant Power Supply
DC system power input available on the Cisco 2811/2911, Cisco 2821/2921, Cisco 2851/2951, Cisco 3825/3925, and Cisco 3845/3945 routers; PoE option not available with DC system power inputDC Power Support
:Minimum Cisco IOS Software Release 12.3(8)T for 1841. 280 Series and 3800 Series routers
IP Base image.
Minimum Cisco IOS Software Release 15.0(1)M for Cisco 1900 Series, Cisco 2900 Series and Cisco 3900 Series routers: IP Base License of the Universal image
Software Support
Environmental
32to 104°F (0 to 40°C)Operating Temperature
10to 85% noncondensing operating; 5 to 95% noncondensing, nonoperatingOperating Humidity
4to 149°F (-20 to 65°C-)Nonoperating Temperature
(Moderate 1.5°C per 1000 feet)Operating Altitude
When installed in a Cisco 1841, Cisco 2800, or Cisco 3800 router, the Cisco EtherSwitch HWIC meets the standards (regulatory compliance, safety, EMC) of the router itself. Refer to the data sheets for the Cisco 1841, Cisco 2800, and Cisco 3800 series routers for more detailsRegulatory Compliance, Safety, EMC

 

سایر محصولات مشابه:

ماژول سیسکو HWIC-4SHDSL

ماژول سیسکو HWIC-4T

ماژول سیسکو HWIC-4SHDSL-E

 

جهت مشاهده کلیه مقالات مربوط به ماژول و کارت شبکه بر روی لینک کلیک نمایید

نوع کارت ماژول

HWIC

سرعت انتقال داده

10/100Mbps

نوع پورت

RJ45

تعداد پورت شبکه

4Port

پروتکل های مدیریتی

SNMP 1, SNMP 2, SNMP 3, Telnet

استاندارد ها

IEEE 802.1D, IEEE 802.1p, IEEE 802.1x, IEEE 802.3, IEEE 802.3u, IEEE 802.3x

گارانتی

گارانتی 1 ساله مسترشبکه

پشتیبانی توسط دستگاه های:

1841, 1941, 2801, 2811, 2821, 2851, 2901, 2911, 2921, 2951, 3825, 3845, 3925, 3945

دمای کارکرد

Max Operating Temperature : 40°C, Min Operating Temperature : 0°C

ابعاد دستگاه

Depth : 12.03cm, Height : 1.93cm, Width : 7.8cm

وزن

0.07kg

3
2 بررسی
0
0
2
0
0

2 دیدگاه برای کارت ماژول سیسکو مدل HWIC-4ESW

حذف فیلترها
  1. ایمان پارسا

    فقط برای کلاس خویه

  2. محمدحسن بردبار

    خیلی خوبه و اگه میتونید بخرید حتما بگیرید

دیدگاه خود را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

PDF محصول

آخرین محصولات مشاهده شده